Preparing Your Vehicle
1. Wash Thoroughly
Start by washing the car with a pH-neutral shampoo to remove all dirt, grime, and contaminants. Avoid any wax-infused soaps.
2. Clay Bar Treatment
Use a clay bar to lift embedded particles that washing cannot remove. This ensures a clean surface for bonding.
3. Paint Correction (If Needed)
If your vehicle has swirl marks or scratches, polish the surface using a dual-action polisher. Ceramic coating locks in the paint’s current state, so any imperfections should be corrected first.
Applying the Ceramic Coating
4. Use an Applicator Pad
Pour a few drops of ceramic coating onto a microfiber applicator pad. Apply it in overlapping crosshatch strokes to one section at a time.
5. Let It Flash
Wait 1–2 minutes for the coating to "flash" (you’ll notice a rainbow or haze), then buff off gently with a microfiber towel.
6. Let It Cure
Keep the car away from water and dust for 24–48 hours to allow the coating to cure properly. Avoid washing for at least a week.
Post-Application Tips
- Use ceramic-safe shampoos.
- Avoid harsh chemicals.
- Apply a maintenance spray every few months to boost protection.
Conclusion
While applying ceramic car coating requires attention to detail, the results are worth the effort. With the proper preparation and care, your vehicle will enjoy long-lasting protection, reduced maintenance, and a stunning finish.